L0.0003383
The L10 is the brightest and largest L-Series lamphead to date. Its substantial 10 inch Fresnel lens and powerful output allow for more distant fixture placement and the wrapping of light around objects in a natural and pleasing way. At more than twice the brightness of the L7, the L10 is also one of the brightest LED Fresnels on the market.
| Optical System | Focusable Fresnel |
| Lens Diameter | 274 mm / 10 inch |
| Beam Angle | Beam Angle |
| Weight | Manual Version - 19.3 kg (42.5 lbs) Pole Op Version - 20.7 kg (45.6 lbs) |
| Handling | Adjustable Sliding Stirrup, High Strength Tilt Lock, Pole Operation Option (Pan, Tilt and Focus) |
| Mounting | 28 mm Spigot (Junior Pin) |
| Tilt Angle | +/- 90° |
| Power Supply Range | 100 to 250 V AC, 50/60 Hz |
| Power Consumption | 400 W (Nominal), 510 W (Maximum) |
| Power Connection | powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available) |
| White Light | 2,800 K to 10,000 K Continuously Variable Correlated Colour Temperature |
| Coloured Light | Full RGB+W Colour Gamut with Hue and Saturation Control |
| Colour Temperature Tolerance | +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal) |
| Colour Rendition | CRI Average >95 (3,200K to 6,500K), TLCI Average >91 |
| Green-Magenta Adjustment | Continuously Adjustable (Full Minusgreen to Full Plusgreen) |
| Dimming | 0 to 100% Continuous |
| Control | 5-Pin DMX In and Through, On-Board Controller, Mini-USB |
| Remote Device Management (RDM) | DMX Setup, Hour Counter and Standard RDM Commands |
| Mini-USB Interface | DMX Setup, Fixture Status and Firmware Upgrade Through PC Software |
| Housing Colour | Blue/Silver (also available in black) |
| Ambient Temperature Operation | -20 to +45º C (-4 ? +113º F) |
| Protection Class | IP 20 |
| Estimated LED Lifetime (L70) | 50,000 hours |
| Estimated Colour Shift Over Lifetime | +/- 5% K |
| Certifications | CE, FCC, GS, CB, cNRTLus |
Tuneability is the cornerstone of all ARRI LED fixtures and much like the L7 and L5, its smaller counterparts, the L10 is fully colour tuneable. With the ability to adjust the colour temperature from 2,800 – 10,000 K, as well as the green/magenta point, users have complete control over the colour output of the fixture.
In a robust housing that combines aluminium with high-strength, fibreglass-reinforced thermoplastics, the L10 is designed to withstand the stresses of diverse professional environments, from motion picture sets to television studios and everything in-between. This robust construction allows the L10 to live up to the benchmark of rugged durability set by other ARRI lighting fixtures.