Colour temperature, tint and hue can be continuously adjusted from 2,800 K to 10,000K, between full plus or minus green and RGBW colours.
The L5 addition to the L-Series perfectly complements the L7, allowing for more mobile lighting and a wider range of power classes for television studios. Its compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions. This versatility and superb light quality make the L5 a highly anticipated addition to the award-winning L-Series family.
137 mm / 5 inch
14° - 50° (Half Peak Angle)
Manual Version - 5.1 kg (11.2 lbs)
Adjustable Sliding Stirrup, High Strength Tilt Lock,
16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)
2,800 K - 10,000 K Continuously Variable Correlated Colour Temperature
Full RGB+W Colour Gamut with Hue and Saturation Control
Colour Temperature Tolerance
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
CRI Average >94, TLCI Average >90
Continuously Adjustable (Full Minusgreen to Full Plusgreen)
Dimming 0 - 100% Continuous
5-Pin DMX In and Through, On-Board Controller, Mini-USB
Remote Device Management (RDM)
DMX Setup, Hour Counter and Standard RDM Commands
DMX Setup, Fixture Status and Firmware Upgrade Through PC Software
Ambient Temperature Operation
-20 ? +45º C (-4 ? +113º F)
Estimated LED Lifetime (L70)
Estimated Colour Shift Over Lifetime
+/- 5% K
CE, GS, FCC, cNRTL, CB
New features available on the L5 include a PowerCON power connector and an on-board battery input that permits industry-standard batteries to power the L5 without any sacrifice in terms of features or light output. The resulting increase in portability opens up whole new application areas, giving productions with the L5 the tremendous freedom to move and work fast.
The L5 is approximately 45% brighter than a 300 watt tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size.
The Stand-mount version include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.