Search

Contact Us

GNXR12/10A

LSC GEN-X Advanced Dimming & Power System

We work with you to find the best pricing solution for your needs.

Mounting: Rackmount
Configuration: 12 x 10A
Outputs: Australian GPO

The LSC GEN-X is the seventh generation of LSC's Australian-made dimmers, and the first with Ethernet control built in. Every channel can run as a high-quality dimmer or as a TruPower relay passing clean, full mains power, so a single system can drive tungsten fixtures, LED luminaires, moving lights, video screens and audio amplifiers.

GEN-X comes as a 3RU 19" rackmount for portable and touring use, or as a compact wallmount for permanent installations. Models run from 12 channels at 10A or 16A, through 6 channels at 25A, to 3 channels at 63A, with a choice of output connectors.

Features
  • Every channel can be set as a dimmer or as a TruPower relay for clean, switched mains power
  • Active Triac Control dimming in 8-bit or 16-bit, with selectable fade curve and min/max levels per channel
  • DMX512 / DMX512-A with RDM on 5-pin XLR in and thru
  • sACN, Art-Net and artRDM over an EtherCon RJ45 connection
  • 3.2" colour touchscreen for channel setup, local output control and fault display
  • Individual RCBO with 30mA trip on every channel
  • Auto power mode turns switched channels on when DMX is present and off when it is lost
  • Stored DMX snapshot as a backup scene on loss of signal
  • Local riggers' control to play back scenes and chases without a console
  • Remote setup and monitoring via RDM or LSC Houston X
  • Alarms for phase failure, over-temperature and DMX loss
  • Rackmount (3RU 19") and wallmount models
  • CE and RCM approved, 2-year warranty, designed and made in Australia
Specs
Product Type Dimmer and TruPower switched power system
Channel Modes Dimmer (Active Triac Control) or TruPower relay, set per channel
Control DMX512 (1990), DMX512-A with RDM on 5-pin XLR in/thru; sACN, Art-Net and artRDM on EtherCon RJ45
Dimming Resolution 8-bit or 16-bit
Display 3.2" colour LCD touchscreen
Protection RCBO per channel, 30mA trip
Power Input 110-240V AC nominal, 3-phase star, 50-60Hz (operating range approx. 90-260V, 45-65Hz)
Rackmount Size 483 x 300 x 132 mm (3RU 19")
Rackmount Weight 18.5 kg (12 x 10A and 6 x 25A), 21 kg (12 x 16A)
Wallmount Size 490 x 270 x 250 mm
Wallmount Weight 21.5 kg (removable rear section approx. 1 kg)
Rackmount 12 x 10A GNXR12/10A Australian GPO outlets, GNXR12/10T rear screw terminals, GNXR12/10W 2 x 16-pin Wieland, GNXR12/10X 2 x 19-pin Socapex
Rackmount 12 x 16A GNXR12/16A Australian GPO outlets (12 x 15A), GNXR12/16T rear screw terminals, GNXR12/16W 2 x 16-pin Wieland, GNXR12/16X 2 x 19-pin Socapex
Rackmount 6 x 25A GNXR6/25A Australian GPO outlets (6 pairs of 20A/15A), GNXR6/25T rear screw terminals
Rackmount 3 x 63A GNXR3/63C 63A single-phase Ceeform outlets, 63A 3-phase tail and plug, MCB and RCD per channel (no TruPower)
Wallmount 12 x 10A GNXW12/10A front Australian GPO outlets plus internal screw terminals, GNXW12/10T internal screw terminals only
Wallmount 6 x 25A GNXW6/25A front Australian GPO outlets plus internal screw terminals, GNXW6/25T internal screw terminals only
Mounting Options Optional adaptor brackets for Roobar frames and hanging brackets for Unistrut
Certifications CE, RCM
Warranty 2 Years
Country of Origin Australia
More info

Dimmer or TruPower?

TruPower turns a channel into a relay that passes clean, full mains power, which suits LED fixtures, moving lights, video screens and audio amplifiers. Dimmer mode gives smooth dimming for tungsten and other dimmable loads. You can mix both modes in one unit and change them later from the touchscreen, so the system can follow a venue as it moves to LED.

Rackmount or wallmount

Rackmount units suit touring and flight-case use. Wallmount units are built for permanent installs: they are low enough to stack closely on a wall, and the rear section can be fixed and wired first so the electrical work and the dimmer install can be done separately.

Choosing a model

Pick the model by the number of circuits, the current each circuit needs and the output connector you want. The 12-channel models come in 10A or 16A per channel, the 6-channel models give 25A per channel, and the 3 x 63A rackmount is a high-current distribution unit with an MCB and RCD per channel and no TruPower. Wallmount models are available in 12 x 10A and 6 x 25A.

Downloads