Need a better deal? Contact us for your price
We work with you to find the best pricing solution for your needs.
CYC LED 300W is an asymmetric direct light wall-washer that operates with overlapping crossed beams, ensuring a uniform projection of 6×6 metres in width by positioning the fixture just 1.5 metres from the backdrop.
The Hyperion Series Spotlight fixtures are capable of emulating the performance of a halogen lamp.
In the continuous effort to satisfy light designers “nostalgic” for halogen light and to approach the natural perception the human eye has of an object illuminated by LED, it is not enough for the static light to simulate halogen light; it must also do so in its dynamic adjustment. For an LED fixture to behave like a halogen fixture, three aspects must be considered:
The dimmer curve, which represents the inertia with which the light is delivered by the source depending on the signal it receives. It can be set as linear or quadratic with a “slow release” curvature.
The delay, meaning the “latency” with which a filament starts emitting light after receiving the electrical stimulus. It shifts the curve by milliseconds, adjustable.
The amber shift effect (not available)
Booster – this is a function that allows increasing the light output of individual channels by up to +20% when a color tint or CCT value is selected in which not all channels are at full power. A microprocessor monitors the LED’s operating temperature and updates the source control parameters in real time.
Calibration – when using a group of fixtures, it can happen that one or more of them, with the same DMX values, has a color component (e.g., red) that needs to be “corrected” to match the color tone of the other fixtures. This function allows modifying the spectral curve of a fixture by adjusting the contribution of a single color within the array.
Custom presets – in addition to a rich library of “factory” colors (standard presets), it is possible to create and save up to 10 colors within a second library (custom presets).
Selectable between 8 and 16 bits, dimming occurs without stepping, flashing, or visible flickering.
Within the intuitive menu, it is possible to choose between different dimming curves.
A special algorithm also ensures that the color temperature remains constant during dimming.
| Light Source | 300 W LED Array (18 × 16 W LEDs) |
| Fixture Type | Cyclorama |
| Colour Modes | RGBW |
| Luminous Flux | 4,504 lm |
| CRI / TLCI | >85 / 90 |
| TM-30 | 90 |
| Dimming Curves | Up to 3 selectable curves |
| PWM Frequency | 500 Hz – 20 kHz |
| Green Adjustment | ± Green |
| LED Boost | Up to +20% output |
| Fan Modes | Auto / Standard / Silent |
| Noise Level (Silent Mode) | 26.3 dBA @ 1 m / 20.3 dBA @ 2 m |
| DMX Control | XLR 5-pin In / Out, RDM supported |
| Stand-Alone / Master-Slave | Supported |
| Power Consumption | 300 W |
| Power Supply | 100–240 V AC, 50 / 60 Hz |
| Power Factor | >0.94 @ 230 V / >0.98 @ 115 V |
| Cooling | Heat-pipe cooling with wide ventilation slots |
| Maximum Ambient Temperature | 40 °C |
| Housing | Highly resistant extruded aluminium |
| Finish | Black (other RAL colours on request) |
| Ingress Protection | IP20 |
| Dimensions | 250 × 570 × 430 mm |
| Weight | 15.0 kg |
| Compliance | CE, EN 60598-1, EN 60598-2-17 |
| Manufacturing | Made in Italy (ISO 9001:2015) |
